We bring you not only the motor, but also  solutions We are currently upgrading our Website
Contact Us:(0086) 0750-2635680
Current location::Hone > > Product

AC Single Phase Capacitor Operated Motors

NCP86 Series (Output: 15~50W Approx.)

1. The rated voltage can be from 100V to 240VAC. The frequency can be either 50Hz, or 60Hz, or 50/60Hz.

2. The motor can be made of 2 poles, 4 poles, 6 poles, etc as needed. Single speed, 2 speeds, 3 speeds or 4 speeds are all available.

3. The standard shaft diameter (d) is ?8mm. It can be others, and with D-cuts, threads, etc.. Its length (L2) can be any as needed.

4. The stator height (H) can be any from 20mm to 50mm.

5. The bearing brackets (housing) can be made either by steel sheet or by zinc-aluminum alloy, with or without a mounting flange.

6. The rotor bearings can be of either sleeve bearings (bush) or ball bearings as needed to reach different lifetime.

7. The motor rotation can be either in CW or CCW direction as needed.

8. RoHS compliant is available.

9. The motor is CCC certified. Certificate No.: 2017010401996939.

Information download:

P24 Nostop Capacitor Operated Motors NCP86 Series.pdf

These motors are mainly used for Bread-makers, Ventilators, Exhausters, Air-purifiers, Fans, etc.



Motor Model

Stator Height

Shaft Total L

Shaft Extended L

Shaft Diameter

D-cut Thickness

D-Cut Length

Thread Specs

NCP8625S

25mm

121

24.3

?8.0

7

15

M4*8 Right

NCP8635B

35mm

129

21.5

?8.0

7

14

No Threads



Technical Performances (tested under room temperature) :

Specs

Model

Stack

Height

Number

of Poles

Rated Supply

@ No Load

@ Max. Efficiency

Volt.

Freq.

Current

Power (in)

Speed

Current

Power (in)

Speed

Torque

Power (out)

(mm)

----

(VAC)

(Hz)

(Amp)

(Watts)

(rpm)

(Amp)

(Watts)

(rpm)

(mNm)

(Watts)

NCP8625S

25

4

230

50

0.41

87

1450

0.50

113.0

1120

297

34.0

NCP8635B

35

4

220

50

0.30

63

1450

0.40

88.5

1184

241

29.8

Remarks: This catalog listed just some typical models. The performances as above are just for reference only. We can adjust our motor specifications according to what the customer needs. OEM & ODM are both welcome.